ESI 1000
ESI 1000 is a solvent-free, two component seamless epoxy coating system. It exhibits very good chemical and physical properties and is esthetically pleasing. This system has been approved by the Canadian Food Inspection...
ESI 1000 BAR TOP
ESI 1000 CASTING RESIN
ESI 1000 MRBP
ESI 1000 MRBP (MOISTURE REDUCTION BARRIER PRIMER) is a two component 100% total solids epoxy moisture reduction primer formulated to reduce moisture vapour transmission in green or old concrete slab on...
ESI 4000 - Water Based Primer / Sealer
ESI 4000 Water Based Epoxy Primer/Sealer is an economical clear concrete sealer that will outperform other water-based acrylic or acrylic/urethane sealers in both chemical resistance and wear. It has a low viscosity which...
ESI 5000 - Clear Industrial Grade Epoxy
** NOT FOR RESIDENTIAL APPLICATIONS ** ESI 5000 is solvent free two component, 100% epoxy coating system. It exhibits excellent clarity, smooth or orange peel textured finish and good chemical...
ESI 6000 - 2K Waterborne Polyurethane Coating System
ESI 6000 is a two component waterborne polyurethane coating system. It provides outstanding appearance, good chemical and resistance as well as excellent physical properties. This system has been approved by...
ESI 7000 - Waterproofing Membrane Basecoat
ESI 7000 Waterproofing Membrane Basecoat is a flexible modified polymer membrane formulated with the most advanced chemistry available to provide a tough seamless waterproofing system with excellent crack bridging capabilities....
ESI 8000 - Clear Exterior Epoxy
ESI 8000 Exterior Epoxy is a two component, self-leveling, 100% solids tintable epoxy coating. ESI 8000 Exterior Epoxy is a high build epoxy coating system designed for applications up to...
ESI 9000 - Polyaspartic Coating System
ESI 9000 is a solventless, two component polyaspartic coating system. It provides outstanding appearance, superior chemical, U.V., and solvent resistance. It exhibits excellent physical properties. This system has been approved...
ESI CRACK FILLER
ESI Crack Filler is a 2-part, rapid curing, high solids, and flexible epoxy. The components of ESI Crack Filler are mixed in a 1:1 ratio. USES Filling cracks and non-moving construction joints...
ESI MRBP Moisture Reduction Primer
ESI MRBP is a solvent free epoxy based clear liquid applied moisture reduction barrier primer. It exhibits outstanding suppression of moisture vapour transmission for slab on grade and below grade...
ESI SANDPOXY
ESI Sandpoxy is a 3 part epoxy mortar consisting of an ultra low VOC, 2 part rapid setting 100% epoxy resin/hardener and several grades of natural sand aggregates and fine...
ESI Urethane Concrete Coating (UCC)
ESI Urethane Concrete Coating is a state-of-the-art, high-build coating with a matte finish, based upon phthalate-free, water dispersed polyurethane/cement and aggregate technology applied at 10 mils per coat. It is...
ESI Urethane Concrete Topping (UCT)
ESI Urethane Concrete Topping (UCT) is a self-levelling slurry to be applied at 3/16” thickness and broadcast to yield a 1/4” - 3/8” finished system. ESI Urethane Concrete Topping (UCT)...
